Find out details about your system’s temperature

To find out more about your system’s temperature, install acpi. Then do a simple

acpi -V

to get a listing similar to this one:

Battery 0: Full, 100%
Battery 0: design capacity 7800 mAh, last full capacity 4988 mAh = 63%
Adapter 0: on-line
Thermal 0: ok, 63.5 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 126.0 degrees C
Cooling 0: Processor 0 of 10
Cooling 1: Processor 0 of 10

This entry was posted in acpi, Applications, cli, Syndicated, System, temperature. Bookmark the permalink.

Comments are closed.